Wall and facade covering: Plaster, natural stone, brick, concrete, aluminium, glass, etc.
Ceiling panels: All thermal panels, synthetic panels, wood, PVC, PUR, etc
Window Frames: Coated aluminium, solid wood, synthetic
Door frames and window sills: Natural or coated, natural stone, brick, concrete, aluminium, brass, etc Safe and does not leak.
Floor, wall tiles and plinths: Marble, granite, Belgian blue stone, porous materials and earthenware,
Roofing elements: All roofing elements made from wood, steel or in combination with roof covering and lead sheets (excludes bitumen).
Construction elements: All construction elements made from stainless steel, aluminium, metal, copper, etc.
Benefits
Tec7 X-Tack does not sag even with adhesive of 40mm in height.
Tec7 X-Tack has an extremely high initial adhesive strength, which often makes third hand fixing unnecessary.
Tec7 X-Tack replaces soldering, bolts, nuts, nails, etc, saving you time and money!
Instructions For Use
Do not cut off the spout, it has a V-groove that helps apply the adhesive at the proper height.
Place the nozzle vertically (at 90?) in the area that needs to be filled with adhesive and dispense.
Always use on a clean and dust-free surface – which can be wet.
Clean and degrease the surface with Foam 7.
If needed, finish the adhesive with Tec 7-Cleaner.
For difficult surfaces (powered coatings and other materials made of PP, PE, silicone bitumen, etc) test the adhesion first.
For ease of use we recommend using our Tec 7 Gun