Stihl FS 70 RC-E Loop Handle 2 Stroke Brushcutter

Stihl FS 70 RC-E Robust 0.9 kW Petrol Brushcutter with ErgoStart and Loop Handle

Extremely robust 0.9 kW petrol brushcutter with loop handle. 2-Mix engine consumes up to 20 percent less fuel and 70 percent less emissions compared to conventional two-stroke engines without 2-Mix technology. ErgoStart simplified starting procedure for increased comfort. Optimised trimmer angle for working on large areas of tough grass.

Features:

• Reduced-emission engine technology: 2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20 percent lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions
• Manual fuel pump (Purger): A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations
• Stihl ErgoStart (E): Stihl ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one-third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself
• Simplified starting system: Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting
• Loop handle (R): The loop handled grass trimmers and brush cutters are ideal for working in areas where space is limited, e.g. thinning between bushes and shrubs
• Multi-function control handle: Easy, comfortable thumb-operated control means the operator's hand never leaves the handle
• Basic harness: For use with loop handle machines

Specifications:

• Displacement: 27.2 cm³
• Power Output: 0.9 kW
• Sound Pressure Level (Metal Tool): 94 dB(A) 
• Sound Pressure Level (Plastic Tool): 94 dB(A
• Sound Power Level (Metal Tool): 107 dB(A)
• Sound Power Level: 108 dB(A) 
• Vibration Value Right with Plastic Tool: 6 m/s²
• Vibration Value Left with Plastic Tool: 7.6 m/s²
• Vibration Value Left with Metal Tool: 6.6 m/s²
• Vibration Value Right with Metal Tool: 6.6 m/s²
• Total Length: 170 mm
• Cutting Diameter: 420 mm
• Tank Volume: 0.34 litre
• Standard Cutting Tool: AutoCut 25-2
• Weight: 4.8 kg

Includes:

• Autocut head 25-2