Makita DLX2372TJ 18V LXT Twin Kit DTW300Z Impact Wrench & DHR242Z SDS+ Hammer (2x5.0Ah)

• Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200
• One touch slide chuck for SDS-plus bit
• Easy-to-grip handle
• Ergonomically designed to give maximum power thrust
• Provides a sure and comfortable grip in any operation
• 3 mode operation: Rotation + Hammering, Hammering only & Rotation only
• The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are jointed with vibration absorbing cushion rubbers
• High productivity achieved by using efficient Brushless DC motor to reduce energy loss by 30% giving longer run times between battery charges

• Max in Steel: 13 mm
• Max in Wood: 27 mm
• Max in Concrete: 24 mm
• No Load Speed: 0-950 rpm
• Blows per Minute: 0-4,700 bpm
• Single Impact Energy: 2.0J
• Vibration: 15/sec2
• Charging Time: Approx 22 min
• Net Weight: 3.3 kg

FEATURES:

• Efficient BL™ Brushless Motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
• The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
• 3 forward and 3 reverse Auto-Stop modes for increased efficiency
• 4 Stage power selection for optimum rpm and fastening torque
• 330 Nm of Max Torque and 580 Nm of Nut-Busting Torque
• XPT technology that protects against dust & moisture
• LED Job light with pre-glow and after-glow functions
• Compact and ergonomic design at only 144 mm long
• Rubberised soft grip provides increased comfort on the job
• Equipped with Star Protection Computer Controls™ to protect against overloading, over-discharging and over-heating

• Voltage: 18v LXT
• Driving Shank: 1/2"" Square
• Max. Fastening Torque: 330 Nm
• Nut Busting Torque: 580 Nm
• Blows per Minute (Hi): 0 - 3400 ipm
• Blows per Minute (Med): 0 - 2600 ipm
• Blows per Minute (Lo): 0 - 1800 ipm
• Standard Bolt: M10 - M20
• High Tensile Bolt: M10 - M16
• No Load Speed (Max): 0 - 3200 rpm
• No Load Speed (Hard): 0 - 2600 rpm
• No Load Speed (Med): 0 - 1800 rpm
• No Load Speed (Soft): 0 - 1000 rpm
• Net Weight: 1.5 - 1.8 kg
• Noise Sound Pressure: 97 dB(A)
• Noise Sound Power: 108 dB(A)
• Noise K Factor: 3 dB(A)
• Vibration Fastening Bolt: 12.5 m/sec²
• Vibration K Factor: 1.5 m/sec²

INCLUDES:

• 1x DHR242Z SDS+ Rotary Hammer Drill
• 1x DHR242Z Side Handle
• 1x DHR242Z Depth Stop
• 1x DTW300Z Impact Wrench Body Only
• 1x Belt Clip
• 1x DC18RC Charger
• 2x BL1850B Batteries
• 1x MakPac Connector Case Type 4