Knipex 26 21 200 - Snipe Nose Side Cutting Pliers (Stork Beak Pliers) 200mm

Knipex 26 21 200 - Snipe Nose Side Cutting Pliers (Stork Beak Pliers) Black Atramentized, Head Polished, Handles Plastic Coated 200mm

FEATURES:

• Snipe Nose Side Cutting Pliers (Stork Beak Pliers) black atramentized, head polished, handles plastic coated.
• Elastic tips: dimensionally stable even when twisted.
• Distortion-tolerant, elastic precision tips.
• Half-round, long, tapered jaws.
• With cutting edges (hardness approx. 61 HRC) for soft, medium-hard and hard wire.
• Vanadium electric steel, forged, multi stage oil-hardened.
• The Knipex 26 21 200 needle nose pliers are primarily used for gripping, aligning and installation work.
• Because these types of work often involve cutting wire or conductors, a cutting function has been integrated.
• The sharp blades of the Knipex 26 21 200 which have also been hardened to 61 HRC are shaped to produce a bite type cut.
• The elastic precision tips of the needle nose pliers von Knipex remain stable when twisted.
• This allows the manual force deployed to be well measured - forcefully where necessary.
• The position of the cutting edges near the joint is very advantageous for the transmission of force.

SPECIFICATION

• Cutting capacities of ø 3.2 mm (medium-hard wire) and ø 2.2 mm when cutting hard wire can be achieved.
• Strong when gripping and cutting - inherently stable also where there is twisting.
• The very long tips of the Knipex 26 21 200 make it possible to grip components that are hard to reach accurately and powerfully.
• The benefits of these snipe nose side cutting pliers can be seen immediately when difficult to reach components in technical assemblies, on engines and machinery are positioned, held, installed and modified.
• A tool that is suitable equally for delicate work and for powerful holding and cutting.
• Bevel: cutting edges with bevel
• Cutting Capacities Hard Wire: 2.2 mm
• Cutting Capacities Medium-Hard Wire: 3.2 mm
• Gripping Surface Length: 23 m
• Handles: plastic coated
• Head : polished
• Head Angle: 40°
• Head Width: 18 mm
• height: 13 mm
• Jaw Length: 73 mm
• Jaw Thickness: 9.5 mm
• Jaw Type: half-round jaws
• Length: 200 mm
• RoHs: no
• Standard DIN: DIN ISO 5745
• Surface: black atramentized
• Tip Thickness: 2.5 mm
• Tip Width: 3 mm
• Weight: 171 g
• Width: 47 mm